252
Programming Manual
Program 26: ARS Service & Least Cost Routing
26-08:
LCR Manual Override Access Code Table
IN
SA
SB
Description
Use Program 26-08 : LCR Manual Override Access Code Table to define the access codes that the users can dial
to select an indirect carrier i.e. bypass the automatic selection of Program 26-02.
Input Data
Manual Override Access Code Table Number
1-10
Prog. No. Description Input Data Default
Related
Program
26-08-01
Manual Override Access Code
This code is dialed by the user to
bypass the automatic selection.
Max.4 digits( 0-9,*,#) No setting 26-02
26-08-02
Carrier table No.
The carrier table number of
Program 26-05.
0-25 0 26-05
Conditions
The override code must begin with a digit 1 or it will not be checked against this table.
There can also exemptions to this table in Program 26-09.
Feature Cross Reference
Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-08(LCR Manual Override Access Code Table):
1. Enter the programming mode.
2. Enter 26 08
3. Enter the number of the item you want to program.
4. Select the Manual Override Access Code Table number to be programmed by pressing the FLASH or the
VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
26-08-01Manual 1
Dial
26-08-xx
Manualxx
To Next Page
Loading...
