NEC Aspila Topaz - 80-05: Data Format for SMDR and System Reports

329
Programming Manual
Program 80: Basic Hardware Setup for System
80-05:
Data Format for SMDR and System Reports
SA
SB
IN
Description
Use Program 80-05 : Date Format for SMDR and System Reports to define the date format when printing out
the SMDR, alarm report, system information report, etc.
Input Data
Data Format
Default
0 : American Format (Month / Date / Year)
1 : Japanese Format (Year / Month / Date)
2 : European Format (Date/Month/Year)
2
Conditions
None
Feature Cross Reference
 Station Message Detail Recording
 Time and Date
Telephone Programming Instructions
To enter data for Program 80-05(Data Format for SMDR and System Reports):
1. Enter the programming mode.
2. Enter 80 05
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
80-05-01
Data Format 2
80-05-xx
xxxxx