347
Programming Manual
Program 82: Basic Hardware Setup for Extension
82-07: CODEC Filter Setup for Analogue Station Ports
IN
SA
SB
Description
Use Program 82-07 : CODEC Filter Setup for Analogue Station Ports to define the CODEC (QSLAC) Filter for
each analogue extension port.
The CODEC filter operates according to a set value of PRG82-09 when CODEC filter type 4(Specified Data) is set
in this setting.
Input Data
Extension Port Number
01-72
CODEC Filter Type Default
Related
Program
0 : No filter
1 : 0 dB Loss
2 : 4 dB Loss
3 : 8 dB Loss
4 : Specified Data
1
82-09
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 82-07 (CODEC Filter Setup for Analogue Station Ports):
1. Enter the programming mode.
2. Enter 82 07
3. Enter the number of the item you want to program.
4. Select the Extension port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
82-07-01Ex Prt1
CODEC Filter 1
82-07-xx Ex Prtxx
xxxxx
To Next Page
Loading...
