NEC Aspila Topaz - 90-19: Dial Block Release

369
Programming Manual
Program 90: Maintenance Program
90-19: Dial Block Release
IN
SA
SB
Description
When the extension number is entered in Program 90-19 : Dial Block Release, the extension will be released from
the Dial Block restriction.
Input Data
Extension Number
Up to 4 digits
Input Data
[CLR Dial Block] : Dial 1 and press HOLD key
(Press only HOLD key for cancel)
Conditions
None
Feature Cross Reference
 Toll Restriction
Telephone Programming Instructions
To enter data for Program 90-19 (Dial Block Release)
1. Enter the programming mode.
2. Enter 90 19
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
90-19-01 TELxxx
CLR Dial Block
90-19-xx TELxxxx
xxxxx