NEC Aspila Topaz - 10-21: EXIFU Hardware Setup

33
Programming Manual
Program 10: System Configuration Setup
10-21: EXIFU Hardware Setup
SB
SA
IN
Description
Use Program 10-21 : EXIFU Hardware Setup to set up various hardware, such as the baud rate of COM port.
Input Data
Prog. No. Item Input Data Default Description
10-21-01
-Not Used- -
-
-
10-21-02
Baud rate for
COM Port
0 : 4800
1 : 9600
2 : 19200
3 : 38400
2
Define the baud rate of the COM port
within the EXIFU-A1/B1.
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 10-21 (EXIFU Hardware Setup):
1. Enter the programming mode.
2. Enter 10 21
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
10-21-02
COM Baud Rate 3
10-21-xx
xxxxx