360
Programming Manual
Program 90: Maintenance Program
90-09: Automatic System Reset Time
IN
SA
SB
Description
Use Program 90-09 : Automatic System Reset Time to define the time the system will automatically reset.
Input Data
Prog.No. Item Input Data Default
Related
Program
90-09-01
Month 00-12(Note 1) 00
90-09-02
Day 00-31(Note 2) 00
90-09-03
Hour 00-23 00
90-09-04
Minute 00-59 00
Note 1. If the Month is set to “00” and Day has been set, the system will automatically be reset every month of
defined day.
Note 2. If the Day is set to “00” and the Time (Hour and Minute) has been set, the system will automatically be
reset every day of defined time.
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-09 (Automatic System Reset Time Setup):
1. Enter the programming mode.
2. Enter 90 09
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
90-09-01
SysReset Month0
90-09-xx
xxxxx
To Next Page
Loading...
