283
Programming Manual
Program 35: SMDR and Account Code Setup
35-02: SMDR Output Options
SA
SB
IN
Description
Use Program 35-02 : SMDR Options to set the SMDR (Station Message Detail Recording) options for the SMDR
port. Refer to the following chart for a description of each option, its range and default setting.
Input Data
SMDR Port Number
1,2
Prog. No. Item Input Data Default
Related
Program
35-02-01
Toll Restricted Call
SMDR can include or exclude calls
blocked by Toll Restriction.
0 : Not Output
1 : Output
1
35-02-02
PBX Calls
When the system is behind a PBX, SMDR
can include all calls or just calls dialed
using the PBX trunk access code.
0 : Not Output
1 : Output
1
35-02-03
Trunk Number or Name
Select whether the system should display
the trunk name (0) or the number (1) on
SMDR reports. If this option is set to “1”,
Program 35-02-14 must be set to “0”
0 : Name
1 : Number
1
35-02-04
Summary (Daily)
Set this option to (1) to have the SMDR
report provide a daily summary (at
midnight every night).
0 : Not Output
1 : Output
1
35-02-05
Summary (Weekly)
Set this option to (1) to have the SMDR
report provide a weekly summary (every
Saturday at midnight).
0 : Not Output
1 : Output
1
35-02-06
Summary (Monthly)
Set this option to (1) to have the SMDR
report provide a monthly summary (at
midnight on the last day of the month).
0 : Not Output
1 : Output
1
35-02-07
Toll Charge Cost
Set this option to (1) have the SMDR
report include toll charges.
0 : Not Output
1 : Output
1
35-02-08
Incoming Call
Enable this option (1) to have the SMDR
report include incoming calls. If you
disable this option (0), incoming calls will
not print.
0 : Not Output
1 : Output
1
35-02-09
Extension Number or Name
Set this option (1) to have the SMDR
report include extension numbers. Set this
option (0) to have the SMDR report
include extension names.
0 : Name
1 : Number
0
To Next Page
Loading...
