NEC Aspila Topaz - 22-05: IRG Assignment for Normal Ring Trunk

195
Programming Manual
Program 22: Incoming Call Setup
22-05: IRG Assignment for Normal Ring Trun
k
SA
SB
COP
Y
IN
Description
Use Program 22-05 : Incoming Trunk Ring Group Assignment to assign trunks to incoming Ring Groups.
Input Data
Trunk Port Number
1-51
Day/Night
Mode
Incoming Group Number Default Description
Related
Program
1-8
0 : No setting
1-25 : Incoming Ring Group
101 : DSPDB-VM
1
Use this program to assign Normal
Ring Trunks (22-02) to Incoming Ring
Groups (22-04).
22-04
22-06
Conditions
None
Feature Cross Reference
 Ring Groups
Telephone Programming Instructions
To enter data for Program 22-05(Incoming Trunk Ring Group Assignment):
1. Enter the programming mode.
2. Enter 22 05
3. Enter the number of the item you want to program.
4. Select the Trunk number to be programmed by pressing the FLASH or the VOLUME or
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
22-05-01 Trunk1
Mode1 IRG =1
22-05-xx Trunkxx
xxxxx