NEC Aspila Topaz - 13-04: Abbreviated Dialing Number and Name

80
Programming Manual
Program 13: Abbreviated Dialing
13-04: Abbreviated Dialing Number and Name
IN
SA
SB
Description
Use Program 13-04 : Abbreviated Dialing Number and Name to store Abbreviated Dialing data into the
Abbreviated Dialing areas. This program is also used to define the names assigned to the Abbreviated Dialing
numbers.
Input Data
Abbreviated Dialing Bin Number
0-1999
Prog. No. Item Input data Default Related Program
13-04-01
Abbreviated Dialing Data
1-9,0,*,#,,P,R,@
(Max. 36 digits)
No
Setting
13-04-02
Name
Max. 12 Characters No
Setting
Transfer Mode 0 : Not defined
1 : Internal Dial
2 : Incoming Ring Group (IRG)
0
13-04-03
Destination Number If Transfer mode are;
1:Internal Dial Mode
1-9, 0, *, #, P,R,@
(Max 36 Characters)
2:Incoming Ring Group: 0-25
(IRG Number)
No
Setting
Conditions
None
Feature Cross Reference
 Abbreviated Dialing
Telephone Programming Instructions
To enter data for Program 13-04(Abbreviated Dialing Number and Name):
1. Enter the programming mode.
2. Enter 13 04
3. Enter the number of the item you want to program.
4. Select the Abbreviated Dialing Bin number to programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
13-04-01 ABB0
Dial=
13-04-xx
A
BBxxx
xxxxx