NEC Aspila Topaz - 26-09: LCR Manual Override Exemption Table

253
Programming Manual
Program 26:
A
RS Service & Least Cost Routin
g
26-09: LCR Manual Override Exemption Table
SA
SB
IN
Description
Use Program 26-09 : LCR Manual Override Exemption Table to define the numbers that must not be sent via an
indirect carrier when the user dials a Manual Override Access Code. The exemptions are normally Emergency
Services that may not be supported by the indirect carrier.
Input Data
Manual Override Exemption Table Number
1-25
Prog. No. Description Input Data Default
Related
Program
26-09-01
Exemption Number Max.4 digits ( 0-9,*,#)
Do not include the Access Code.
Table No.1: 999
Table No.2: 112
Others are no
setting
26-08
Conditions
If the number dialed by the user corresponds to an entry in Program 26-09 the Topaz will delete the Manual Access
code (Program 26-08) and route the call to the direct carrier. If the number specifies an Emergency Service you must
ensure that the direct carrier will accept the call.
Feature Cross Reference
 Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-09(LCR Manual Override Exemption Table):
1. Enter the programming mode.
2. Enter 26 09
3. Enter the number of the item you want to program.
4. Select the Exemption Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
26-09-01Exempt1
Dial 999
26-09-xx
Exemptxx