NEC Aspila Topaz - 24-03: Park Group

221
Programming Manual
Program 24: Hold/Transfer Setup
24-03: Park Group
SA
SB
COP
Y
IN
Description
Use Program 24-03 : Park Group to assign an extension to a Park Group. The system allows a total of 64 Park
Groups. An extension can only pick up a call parked in orbit by an extension in its own group.
Input Data
Extension Number
Max. 4 digits
Park Group
Number
Default Description
Related
Program
1-64
1
Assign an extension to a Park Group. The system allows a total
of 64 Park Groups.
In a Key Telephone, Park Key can be assigned for a Function
Key.
15-07-01
Conditions
None
Feature Cross Reference
 Park
Telephone Programming Instructions
To enter data for Program 24-03(Park Group):
1. Enter the programming mode.
2. Enter 24 03
3. Enter the number of the item you want to program.
4. Select Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
24-03-01 TEL200
ParkHold
24-03-xx
xxxxx