NEC Aspila Topaz - PRG 45: Voice Mail Integration Options; 45-01: Voice Mail Integration Options

319
Program 45: Voice Mail Integration
45-01: Voice Mail Integration Options
Programming Manual
SA
SB
IN
Description
Use Program 45-01 :Voice Mail Integration Options to customize certain voice mail integration options.
Input Data
Prog. No. Item Input Data Default
Related
Program
45-01-01
Voice Mail Department Group Number
Assign which Extension (Department)
Group number is to be assigned as the
voice mail group.
0-32
(0 : No Voice Mail)
0
45-01-02
Voice Mail Master Name
Enter the Voice Mail master name.
Up to 8 characters
“V.M.”
45-01-03
Voice Mail Screening
Enable/disable the system’s ability to
process the Call Screening commands (1 +
extension number) sent from the Voice
Mail. You should normally enable this
option to allow for Voice Mail Call
Screening. Disable this option if your
system has been modified so that extensions
begin with the digit 1 (e.g., 101, 102, etc.).
Also see the Flexible System Numbering
feature.
0 : Off
1 : On
1
45-01-04
Park and Page
Enable/disable the system’s ability to
process the Voice Mail’s Park and Page (*)
commands. You should normally enable
this option.
0 : Off
1 : On
1
45-01-05
Message Wait
Enable/disable the system’s ability to
process the Voice Mail’s Message Wait (#)
commands. You should normally enable
this option. If enabled, be sure that the
programmed Message Notification strings
don’t contain the code #9 for trunk access.
0 : Off
1 : On
1
45-01-06
Record Alert Tone Interval Time
This timer sets the interval between voice
Mail Conversation Record alerts
0-64800 (sec.)
30
45-01-07
-Not Used- -
-
45-01-08
-Not Used- -
-
45-01-09
-Not Used- -
-
Conditions
None