NEC Aspila Topaz - 20-21: System Option for Long Conversation

160
Programming Manual
Program 20: System Option Setup
20-21: System Option for Long Conversation
IN
SA
SB
Description
Use Program 20-21 : System Options for Long Conversation to define the system options for the Long
Conversation feature.
Input Data
Prog. No. Item Input data Default
20-21-01
Long Conversation Alarm 1
The warning tone for long toll calls sounds after this
interval.
0-64800(sec.) 170
20-21-02
Long Conversation Alarm 2
After the initial long toll call warning tone, additional
warning tones sound after this interval.
0-64800(sec.) 180
20-21-03
Long Conversation Cutoff for Incoming Call
This timer determines how long the system will wait before
disconnecting an incoming call.
0-64800(sec.) 0
20-21-04
Long Conversation Cutoff for Outgoing Call
This timer determines how long the system will wait before
disconnecting an outgoing call.
0-64800(sec.) 0
Conditions
None
Feature Cross Reference
 Long Conversation Cutoff
Telephone Programming Instructions
To enter data for Program 20-21(System Options for Long Conversation):
1. Enter the programming mode.
2. Enter 20 21
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
20-21-01
A
larm 1 170
20-21-xx
xxxxx