NEC Aspila Topaz - 35-03: SMDR Port Assignment for Trunk Group

286
Programming Manual
Program 35: SMDR and Account Code Setup
35-03: SMDR Port Assignment for Trunk Group
IN
SA
SB
COP
Y
Description
Use Program 35-03 : SMDR Port Assignment for Trunk Group to assign the SMDR port for each trunk group.
Input Data
Trunk Group No. SMDR Port No. Default Related Program
1-25
1,2
1
Conditions
None
Feature Cross Reference
 Station Message Detail Recording (SMDR)
 Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 35-03 (SMDR Port Assignment for Trunk Group):
1. Enter the programming mode.
2. Enter 35 03
3. Enter the number of the item you want to program.
4. Select the Trunk Group number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
35-03-01TrkGrp1
SMDR Port 1
35-03-xxTrkGrpxx
xxxxx