EasyManua.ls Logo

NEC Aspila Topaz - 11-10: Service Code Setup (for System Administrator)

NEC Aspila Topaz
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Programming Manual
Program 11: System Numbering
11-10: Service Code Setup (for System Administrator)
IN
SA
SB
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service Codes for the
System Administrator. You can customize additional Service Codes in Programs 11-11, 11-12, 11-15, and 11-16.
The following chart shows:
The number of each code (01-)
The function of the Service Code.
What type of telephones can use the Service Code
The code’s default entry. For example, dialing 724 (item 26) allows users to force a trunk line to disconnect.
Programs that may be affected with the changing the code.
Input Data
Prog. No. Item Terminals Default
Related
Program
11-10-01 Day / Night Mode Switching KTS,SLT 818
12-xx
20-07-01
11-10-02 Changing the Music on Hold Tone KTS 881 10-04
11-10-03 Setting the System Time KTS 828
11-10-04 Storing Common Abbreviated Dialing Numbers KTS 853
11-10-05 Storing Group Abbreviated Dialing Numbers KTS 854
11-10-06 Setting the Automatic Transfer for Each Trunk Line KTS 833
11-10-07 Canceling the Automatic Transfer for Each Trunk Line KTS 834
11-10-08 Setting the Destination for Automatic Trunk Transfer KTS 835
11-10-09 Charging Cost Display KTS 771
11-10-10 -Not Used- --
11-10-11 Entry of Credit for Toll Restriction KTS 774
11-10-12 Night Mode Switching (Other Groups) KTS 718 12-xx
11-10-13 -Not Used- --
11-10-14 -Not Used- --
11-10-15 -Not Used- --
11-10-16 Leaving Message Waiting KTS 726 11-11-09
11-10-17 Dial Block by Supervisor KTS 701 90-19
11-10-18 Off-Premise Call Forward by Door Box KTS 822 13-05
11-10-19 -Not Used- --
11-10-20 VRS - Record/Erase Message KTS,SLT 716 20-07-13
11-10-21 VRS - General Message Playback KTS,SLT 711 20-07-14
11-10-22 VRS - Record or Erase General Message KTS,SLT 712 20-07-15
11-10-23 SMDR – Extension Accumulated Printout Code KTS 721 20-07-18
11-10-24 SMDR - Group Accumulated Printout Code KTS 722 20-07-19
11-10-25 Account Code Accumulated Printout Code KTS 723 20-07-20
11-10-26 Forced Trunk Disconnect (For Analogue Trunk only) KTS,SLT 724 20-07-11
11-10-27 Trunk Port Disable KTS 745 20-07-12
11-10-28 -Not Used- --
11-10-29 -Not Used- --
Conditions
None

Table of Contents

Other manuals for NEC Aspila Topaz

Related product manuals