NEC Aspila Topaz - PRG 40: Voice Mail Setup; 40-01: Voice Mail Basic Setup

291
Program 40: Voice Mail Setup
40-01: Voice Mail Basic Setup
Programming Manual
SA
SB
IN
Description
Use Program 40-01 : Voice Mail Basic Setup to define the basic operation of Voice Mail (DSPDB).
Input Data
Prog. No. Item Input Data Default
Related
Program
40-01-01
Exclusive Channel for Voice Mail
Specify the number of channels of
DSPDB which voice mail occupies.
0-16
0
40-01-02 Time Stamp
0 : Disable
1 : Enable
1
40-01-03
Conversation Recording Mode for
After Transfer
Use this program to set up whether after
Hold Transfer continues recording,
when recording conversation.
0 : Not Continued
1 : Continued
0
40-01-04
Automated Attendant (Voice Mail) for
No Existing Extension
0 : Disable
1 : Enable
0
40-01-05
Maintenance Time
Specify time to maintain for DSPDB
record media.
0000-2359
(0000 = No setting)
0000
40-01-06
Automatically Erase Message 0-180(day)
0
Conditions
None
Feature Cross Reference
 Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-01 (Voice Mail Basic Setup):
1. Enter the programming mode.
2. Enter 40 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
40-01-01
V
M Channel 0
40-01-xx
xxxxx