270
Programming Manual
Program 31: External Speaker and Internal Paging
31-04: External Paging Zone Group
IN
SA
SB
Description
Use Program 31-04 : External Paging Zone Group to assign each External Paging zone to an External Paging
group. Users call the External Paging group when broadcasting announcements to the external zone. When
programming, the zones on the PGDU are numbers 1-6.
To simplify programming and troubleshooting, always make the External Paging Zone Group the same number
as the External Paging zone (i.e., 1 = 1, 2 = 2, etc.).
Input Data
External Speaker Number External Paging Group No. Default
1-6 0-6 (0 : No setting)
Speaker 1 (2PGDU-1) : 1 (Group 1)
Speaker 2 (2PGDU-1) : 2 (Group 2)
Speaker 3 (2PGDU-2) : 3 (Group 3)
Speaker 4 (2PGDU-2) : 4 (Group 4)
Speaker 5 (2PGDU-3) : 5 (Group 5)
Speaker 6 (2PGDU-3) : 6 (Group 6)
Conditions
None
Feature Cross Reference
Paging, External
Telephone Programming Instructions
To enter data for Program 31-04(External Paging Zone Group):
1. Enter the programming mode.
2. Enter 31 04
3. Enter the number of the item you want to program.
4. Select the External Speaker number to be Programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
31-04-01 SPK 1
Paging Zone GP 1
31-04-xx SPK x
xxxxx
To Next Page
Loading...
