155
Programming Manual
Program 20: System Option Setup
20-17: Operator’s Extension
IN
SA
SB
Description
Use Program 20-17 : Operator’s Extension to designate an operator. When an extension user dials “0” or “9”
(defined by Program 11-01 Type 5), calls go to the operator selected in this program.
If you don’t assign an extension in Program 90-11-01, system alarms appear on the extension assigned in this
option.
Input Data
Operator Number
1-8
Prog. No. Item Input Data Default
Related
Program
20-17-01
Operator Extension Number Max. 4 digits
No
setting
11-01
20-17-02
Operator Console 0 : Normal KTS
1 : Special Operator Console
0
Conditions
None
Feature Cross Reference
Intercom
Telephone Programming Instructions
To enter data for Program 20-17(Operator’s Extension):
1. Enter the programming mode.
2. Enter 20 17
3. Enter the number of the item you want to program.
4. Select the Operator number to be programmed by pressing the FLASH or the VOLUME or
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
20-17-01 Operat1
Oper.Ext.No.
20-17-xxOperatx
xxxxx
To Next Page
Loading...
