215
Programming Manual
Program 23: Answer Features Setup
23-03: Universal Answer/Auto Answe
SA
SB
COP
IN
Description
Use Program 23-03 : Universal Answer/Auto Answer to assign trunk routes 1-25 (set in Program 14-06) to
extensions for Universal Answer. If the call ringing the paging system is in an extension’s assigned route, the user
can dial the Universal Answer code (843) to pick up the call.
You can also use this program to let an extension user automatically answer trunk calls that ring other extensions
(not their own). When the user lifts the handset, they automatically answer the ringing calls based on Trunk Group
Routing programming (defined in Program 14-06). The extension user’s own ringing calls, however, always have
priority over calls ringing other co-worker’s extensions. Refer to the Line Preference feature for more information.
You make one entry for each Night Service mode.
Input Data
Extension Number
Max. 4 digits
Day/Night
Mode.
Route Table
Number
Default Description
Related
Program
1-8
0-25 0
Use this program to let an extension user
automatically answer trunk calls that ring
other extensions.
When the user lifts the handset, they
automatically answer the ringing calls based
on Trunk Group Routing programming
(defined in Program 14-06).
14-06
Conditions
None
Feature Cross Reference
Line Preference
Night Service
Telephone Programming Instructions
To enter data for Program 23-03(Universal Answer/Auto Answer):
1. Enter the programming mode.
2. Enter 23 03
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
23-03-01 TEL200
Mode1 Route=0
23-03-xx
TELxxxx
To Next Page
Loading...
