NEC Aspila Topaz - 13-05: Abbreviated Dialing Trunk Group

81
Programming Manual
Program 13: Abbreviated Dialing
13-05: Abbreviated Dialing Trunk Group
IN
SA
SB
Description
Use Program 13-05 : Abbreviated Dialing Trunk Group to define the trunk group to be seized for each
Abbreviated Dialing number (refer to Program 13-05).
If this program has an entry of ‘0’ (no setting), then seizing a line follows the trunk access group routing of the
caller’s extension (refer to Program 14-06). This setting is only available in External Abbreviated Dialing Mode
(Program 13-01-01).
Input Data
Abbreviated Dialing Bin Number
0-1999
Trunk Group Number
0-25
Default
No setting
Conditions
None
Feature Cross Reference
 Abbreviated Dialing
Telephone Programming Instructions
To enter data for Program 13-05(Abbreviated Dialing Trunk Group):
1. Enter the programming mode.
2. Enter 13 05
3. Enter the number of the item you want to program.
4. Select the Abbreviated Dialing Area number to programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
13-05-01 ABB0
TRK Group No 0
13-05-xx
A
BBxxx
xxxxx