NEC Aspila Topaz - 16-03: Secondary Department Group

124
Programming Manual
Program 16: Department Group Setup
16-03: Secondary Department Group
IN
SA
SB
Description
Use Program 16-03 : Secondary Department Group to set a second Department Group for extensions. Up to 16
extensions can be assigned per a Department Group.
Input Data
Extension(Department) Group Number
1-32
Secondary
Extension No.
Extension
Number
Priority
Order
Description
Related
Program
01-16 Max. 4 digits 0-999
This program is set up when using telephone into two
or more groups.
Default
All Extension Groups : No setting
Conditions
None
Feature Cross Reference
 Department Calling
Telephone Programming Instructions
To enter data for Program 16-03(Secondary Department Group):
1. Enter the programming mode.
2. Enter 16 03
3. Enter the number of the item you want to program.
4. Select the Pilot extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section
16-03-01 PltEx1
01=Ext No
16-03-xx PltExx
xxxxx