277
Programming Manual
Program 32: Door Box Setup
32-03:
Door Box Basic Setup
SA
SB
IN
Description
Use Program 32-03 : Door Box Basic Setup to select the chime pattern and gain level for each Door Box. There
are six distinctive chime patterns. The chime tones are defined in Program 80-01.
Input Data
Door Box Number
1-6
Prog. No. Item Input Data Default
Related
Program
32-03-01
Chime Pattern 0 : No ringing tone
1 : Door Box ring 1
2 : Door Box ring 2
3 : Door Box ring 3
4 : Door Box ring 4
5 : Door Box ring 5
6 : Door Box ring 6
Door Box 1 : 1
Door Box 2 : 2
Door Box 3 : 3
Door Box 4 : 4
Door Box 5 : 5
Door Box 6 : 6
80-01
32-03-02
CODEC Transmit Gain
Setup
(2PGDU to Door Box)
1-63 : (-15.5…..+15.5dB)
32
32-03-03
CODEC Receive Gain
Setup
(Door Box to 2PGDU)
1-63 : (-15.5…..+15.5dB)
32
Conditions
None
Feature Cross Reference
Door Box
Telephone Programming Instructions
To enter data for Program 32-03 (Door Box Basic Setup):
1. Enter the programming mode.
2. Enter 32 03
3. Enter the number of the item you want to program.
4. Select the Door Box Number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
32-03-01 DOOR 1
Chime Pattern 1
32-03-xx DOOR x
xxxxx
To Next Page
Loading...
