179
Programming Manual
Program 21: Outgoing Call Setup
21-10: Dial Block Restriction Class Per Extensions
SA
SB
IN
Description
Use Program 21-10 : Dial Block Restriction Class Per Extensions to define the Toll Restriction Class to each
extension when the extension is set for Dial Block Restriction. If this data is “0”, Toll Restriction Class follows
Program 21-09-01.
Input Data
Extension Number
Max. 4 digits
Toll Restriction Class Default
0,1-15(0 : No setting) 0
Conditions
None
Feature Cross Reference
Toll Restriction
Telephone Programming Instructions
To enter data for Program 21-10(Dial Block Restriction Class Per Extensions):
1. Enter the programming mode.
2. Enter 21 10
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
21-10-01 TEL200
T/R Class 1
21-10-xx
TELxxxx
To Next Page
Loading...
