228
Programming Manual
Program 25: DID/DISA Setup
25-02: DID/DISA Talkie
IN
SA
SB
Description
Use Program 25-02 : DID/DISA Talkie to assign the VRS message number to be used as the Automated Attendant
Error Message for each trunk which is assigned as a DID/DISA.
Input Data
Trunk Port Number
1-51
Day/Night
Mode
Talkie Type Additional data Default
Related
Program
1-8
0 : No Talkie
1 : VRS
2 : ACI
3 : SLT
1 : VRS 01-48 (VRS Message No.)
2 : ACI 1-4 (ACI Group No.)
3 : SLT 1-32 (Station Group No.)
0
Conditions
None
Feature Cross Reference
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-02(DID/DISA Talkie):
1. Enter the programming mode.
2. Enter 25 02
3. Enter the number of the item you want to program.
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
25-02-01TrkPrt1
Mode1 Talkie= 0
25-02-xxTrkPrtxx
xxxxx
To Next Page
Loading...
