NEC Aspila Topaz - 40-11: Pre-Amble Message Assignment

302
Programming Manual
Program 40: Voice Mail Setup
40-11: Pre-Amble Message Assignment
IN
SA
SB
Description
In Program 40-11 : Pre-Amble Message Assignment to assign the VAU message number to be used as the Pre-
amble Message for each trunk. When the extension user answers the incoming call, the assigned VAU message will
be sent to the outside caller.
Input Data
Trunk Port Number Day/Night Mode VAU Message Number Default
Related
Program
1-51 1-8 0-48(0 : No Service) 0
Conditions
None
Feature Cross Reference
 Voice Response System (VRS)
Telephone Programming Instructions
To enter data for Program 40-11 (Pre-Amble Message Assignment):
1. Enter the programming mode.
2. Enter 40 11
3. Enter the number of the item you want to program.
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
40-11-01 Trunk1
Mode1 Msg No.0
40-11-xx Trunkxx
xxxxx