272
Programming Manual
Program 31: External Speaker and Internal Paging
31-06: External Speaker Control
IN
SA
SB
Description
Use Program 31-06 : External Speaker Control to define the settings for the external speaker using an amplifier.
Input Data
Prog. No.
External
Speaker No.
Item Input Data
Default
31-06-01
Broadcast Splash Tone Before Paging
Use this option to enabled or disable splash
tone before Paging over an external zone. If
enabled, the system broadcasts a splash tone
before the External Paging announcement.
0 : No tone
1 : Splash tone
2 : Chime tone
2
31-06-02
Broadcast Splash Tone After Paging
Use this option to enabled or disable splash
tone after Paging over an external zone. If
enabled, the system broadcasts a splash tone
at the end of an External Paging
announcement.
0 : No tone
1 : Splash tone
2 : Chime tone
2
31-06-03
Speech Path（2PGDU—Speaker）
0 : Both way
1 : One way
1
31-06-04
CODEC Transmit Gain Setup 1-63(-15.5……...+15.5) 32 (0dB)
31-06-05
1-6
CODEC Receive Gain Setup 1-63(-15.5……...+15.5) 32 (0dB)
Conditions
None
Feature Cross Reference
Paging, External
Telephone Programming Instructions
To enter data for Program 31-06(External Speaker Control):
1. Enter the programming mode.
2. Enter 31 06
3. Enter the number of the item you want to program.
4. Select the External Speaker number to be Programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
31-06-01 SPK 1
PG Start Tone 2
31-06-xx
xxxxx
To Next Page
Loading...
