NEC Aspila Topaz - 11-15: Service Code Setup (for Special Access)

61
Programming Manual
Program 11: System Numberin
g
11-15: Service Code Setup (for Special Access)
IN
SA
SB
Description
Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to customize the special access
Service Codes which are used by the administrator. You can customize additional Service Codes in Programs 11-10
through 11-12 and 11-16.
The following chart shows:
• The number of each code (01-11)
• The function of the Service Code.
• What type of telephones can use the Service Code.
• The code’s default entry.
• Programs that may be affected with the changing the code.
Input Data
Prog. No. Item Terminals Default
Related
Program
11-15-01 Remote Maintenance(PC Programming ) 830
11-15-02 -Not Used- --
11-15-03 Backup Data Save KTS ＃*＃9
11-15-04 -Not Used- --
11-15-05 System Programming Mode, Log-In KTS ＃*＃*
11-15-06 -Not Used- --
11-15-07 Recording Destination in Dial-In Conversion Table No Setting
11-15-08 Network Message Lamp Control No Setting
11-15-09
Transfer to Trunk Ring Group Code
Allows a call to be transferred to the Universal Night
Answer External Paging zones.
No Setting 16-02
11-15-10 -Not Used- --
11-15-11 Ethernet Port Reset No Setting
Conditions
None
Feature Cross Reference
• Refer to chart above.