114
Programming Manual
Program 15: Extension Basic Setup
15-09: Virtual Extension Ring Tone Assignment
IN
SA
SB
COP
Description
Use Program 15-09 : Virtual Extension Ring Assignment to assign the ringing options for an extension’s Virtual
Extension Key or Virtual Extension Group Answer Key which is defined in Program 15-07. You make an
assignment for each Night Service Mode. Assign extension numbers and names to virtual extension ports in
Program 15-01. Program Virtual Extension keys in Program 15-07 (code *03).
Input Data
Extension Number
Max. 4 digits
Key Number (KTS with DLS)
01-46
Day/Night Mode Ringing data Default
1-8
0 : No Ringing
1 : Ring
0
Conditions
Program the Multiple Directory Number function keys NOT to ring before removing the key from keyset’s
programming.
Feature Cross Reference
Multiple Directory Number / Call Coverage
Telephone Programming Instructions
To enter data for Program 15-09(Virtual Extension Ring Assignment):
1. Enter the programming mode.
2. Enter 15 09
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
15-09-01 TEL200
KY01 Mode1 = 0
15-09-xx TELxxxx
xxxxx
To Next Page
Loading...
