NEC Aspila Topaz - 31-05: Incoming Ring Tone Audible on External Speaker

271
Programming Manual
Program 31: External Speaker and Internal Pagin
g
31-05: Incoming Ring Tone Audible on External Speake
r
SA
SB
COP
Y
IN
Description
Use Program 31-05 : Incoming Ring Tone Audible on External Speaker to assign Universal Night Ans-
wer ringing to each External Paging zone. For each trunk port (1-51), you make a separate entry for each
External Paging zone (1-6). When programming, the zones on the PGDU are numbers 1-6.
For Incoming Ring Tone Audible on External Speaker, you make a separate entry for each Night Service
mode.
Input Data
Trunk Port No. External Speaker No. Day/Night Mode Input Data Default
1-51 1-6
1-8
0 : No Ringing
1 : Ringing
0
Conditions
None
Feature Cross Reference
 Paging, External
 Night Service
Telephone Programming Instructions
To enter data for Program 31-05(Universal Night Answer):
1. Enter the programming mode.
2. Enter 31 05
3. Enter the number of the item you want to program.
4. Select the Trunk number to be Programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
31-05-01 Trunk1
Spkr1 Mode1 = 0
31-05-xx
xxxxx