NEC Aspila Topaz - 20-15: Ring Cycle Setup

150
Programming Manual
Program 20: System Option Setup
20-15: Ring Cycle Setup
IN
SA
SB
Description
Use Program 20-15 : Ring Cycle Setup to define the ringing cycles for each ring type.
Input Data
Prog. No. Incoming Ring Type Ring Cycle No. Default
Related
Program
20-15-01
Normal Incoming Call on Trunk
3
20-15-02
PBX,CES incoming Call
8
20-15-03
Internal Incoming Call
8
20-15-04
DID/DISA
8
20-15-05
DID
8
20-15-06
Dial-In in the E&M Tie Line
8
20-15-07
Door Box ringing for SLT
2
20-15-08
Virtual Extension Ring
8
20-15-09
Call-back
4
20-15-10
Alarm for SLT
5
20-15-11
VRS Waiting Message Incoming Call
1-13
6
Ring Cycle
Ring Cycle No. Ring Cycle
1 Not Supported
2 On:2.0 / Off:4.0
3 On:1.0 / Off:2.0
4 On:0.5 / Off:0.5
5 On:0.3 / Off:0.3
6 On:0.5 / Off:0.5 / On:0.5 / Off:1.5
7 On:0.3 / Off:0.3 / On:0.3 / Off:5.1
8 On:0.3 / Off:0.3 / On:0.3 / Off:2.1
9 On:0.2 / Off:0.2 / On:0.2 / Off:0.2 / On:0.2 / Off:2.0
10 On:1.0 / Off:4.0
11 On:0.3 / Off:0.3 / On:0.3 / Off:4.1
12 On:1.0 / Off:3.0
13 On:0.3 / Off:0.3 / On:0.3 / Off:2.1
Conditions
None
Feature Cross Reference
 None