194
Programming Manual
Program 22: Incoming Call Setup
22-04: Incoming Extension Ring Group Assignment
IN
SA
SB
Description
Use Program 22-04 : Incoming Extension Ring Group Assignment to assign extensions to Ring Groups. Calls
ring extensions according to Ring Group programming. Use Program 22-05 to assign trunks to Ring Groups. IRG
can have up to 32 extension numbers assigned.
Input Data
Incoming Ring Group Number
1-25
Incoming Ring
Group No.
Extension
Number
Description
Related
Program
01-32
Max. 4 digits
Use this program to assign extensions to Ring Groups.
Calls ring extensions according to Ring Group
programming.
22-02
22-05
22-06
Default
Extension 200 rings for incoming Ring Group 1 calls. All other extensions do not ring for incoming Ring Group 1
calls.
Conditions
None
Feature Cross Reference
Ring Groups
Telephone Programming Instructions
To enter data for Program 22-04(Incoming Extension Ring Group Assignment):
1. Enter the programming mode.
2. Enter 22 04
3. Enter the number of the item you want to program.
4. Select the Incoming Ring Group number to be programmed by pressing the FLASH or the VOLUME or
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
22-04-01INC Gr1
Memb.01= 200
22-04-xx
INCGrpxx
To Next Page
Loading...
