312
Programming Manual
Program 44: ARS/F-Route Setup
44-07: Gain Table for F-Route Access
IN
SA
SB
Description
Use Program 44-07 : Gain Table for ARS/F-Route Access to set the PAD table. If an extension dials ARS/F-
Route number;
• The Extension Dial Gain Table is activated, which is assigned in Program 44-05.
• The Extension Dial Gain Table follows “Outgoing transmit” and “Outgoing receive” settings.
If the incoming call is transferred to another line using ARS/F-Route;
• The Tandem Gain Table is activated, which is assigned in Program 44-05.
• The Tandem Gain Table follows the “Incoming transmit” and “Incoming receive” settings for incoming line, and
“Outgoing transmit” and “Outgoing receive” settings for the outgoing line.
Note: For the ARS/F-Route call (in the above case), CODEC gain in Program 14-01-02 and 14-01-03 are not
activated
Input Data
Gain Table Number
1-500
Prog. No. Item Input Data Default
Related
Program
44-07-01
Incoming Transmit 1-63 (-15.5…..+15.5)
32(0dB)
44-07-02
Incoming Receive 1-63 (-15.5…..+15.5)
32(0dB)
44-07-03
Outgoing Transmit 1-63 (-15.5…..+15.5)
32(0dB)
44-07-04
Outgoing Receive 1-63 (-15.5…..+15.5)
32(0dB)
Conditions
None
Feature Cross Reference
Automatic Route Selection(ARS)/F-Route
To Next Page
Loading...
