296
Programming Manual
Program 40: Voice Mail Setup
40-06: Voice Mail Automated Attendant Data Setup
IN
SA
SB
Description
Use Program 40-06 : Voice Mail Automated Attendant Data Setup to define the outside lines to use the
automated attendant recording operation of the Voice Mail (DSPDB).
Input Data
Trunk Port Number
1-51
Day/Night Mode
1-8
Prog. No. Item Input Data Default
Related
Program
40-06-01
Operation Mode
0 : Automated Attendant
1 : Not Used
0
40-06-02
Guidance Message Number 0-48 0
40-06-03
Message Box Number for Leaving a
Message
0-300 0
Conditions
None
Feature Cross Reference
Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-06 (Voice Mail Automated Attendant Data Setup):
1. Enter the programming mode.
2. Enter 40 06
3. Enter the number of the item you want to program.
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
40-06-01 Trunk1
Mode1 OPE-Mode
40-06-xx Trunkxx
xxxxx
To Next Page
Loading...
