NEC Aspila Topaz - 90-12: System Alarm Output

365
Programming Manual
Program 90: Maintenance Program
90-12: System Alarm Outpu
t
SA
SB
IN
Description
Use Program 90-12 : System Alarm Output to set the options for the alarm report. This program has 6 separate
menu options. Define the output port to be used as the output for system alarm report and set the system alarm
options. The system can have up to 50 reports.
Input Data
Prog.No. Item Input Data Default
90-12-01
Output Port Type
Indicate the type of connection used for the System
Alarms. The baud rate for the COM port should be
set in Program 10-21-02.
0 : No setting
1 : COM Port (EXIFU)
0
90-12-02 -Not Used- - -
90-12-03 Output All Alarm Reports Print All? (Yes : 1) -
90-12-04 Printout New Alarm Reports Print New? (Yes: 1) -
90-12-05 Clear All Alarm Reports All Clear? (Yes : 1) -
90-12-06 Output Mode
0 : Manual
1 : Auto
0
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-12 (System Alarm Output):
1. Enter the programming mode.
2. Enter 90 12
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section
90-12-01
Output Type 0
90-12-xx
xxxxx