274
Programming Manual
Program 31: External Speaker and Internal Paging
31-08: BGM on External Paging
IN
SA
SB
Description
Use Program 31-08 : BGM on External Paging to set the Background Music option for each External Paging zone.
If enabled, the system will play Background Music over the zone when it is idle.
When programming, the zones on the PGDU Units are numbers 1-6.
Input Data
External Speaker Number Input Data
Description
Default
1-6
0 : Disable (BGM
Prevented)
1 : Enable
(BGM allowed)
Use this option to allow or prevent the
External Paging zone you select from
broadcasting Background Music when
it is idle.
0
Conditions
None
Feature Cross Reference
Back Ground Music
Paging External
Telephone Programming Instructions
To enter data for Program 31-08(BGM on External Paging):
1. Enter the programming mode.
2. Enter 31 08
3. Enter the number of the item you want to program.
4. Select the External Speaker number to be Programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
31-08-01 SPK 1
BGM 0
31-08-xx SPK x
xxxxx
To Next Page
Loading...
