NEC Aspila Topaz - 20-12: Class of Service Options (Charging Cost Service)

144
Programming Manual
Program 20: System Option Setup
20-12: Class of Service Options (Charging Cost Service)
IN
SA
SB
Description
Use Program 20-12 : Class of Service Options (Charging Cost Service) to define the Charging Cost feature
availability for each extension’s Class of Service.
Input Data
Class of Service Number
01-15
Prog. No. Item Input Data Default*
Related
Program
20-12-02 Advice of Charge (ISDN-AOC)
1
20-12-03
-Not used-
0 : Off
1 : On
--
*All Classes are above mentioned default value.
Conditions
None
Feature Cross Reference
 Class of Service
Telephone Programming Instructions
To enter data for Program 20-12(Class of Service Options(Charging Cost Service)):
1. Enter the programming mode.
2. Enter 20 12
3. Enter the number of the item you want to program.
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOLUME or
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
20-12-01 F-Cls1
A
dvice Charge 0
20-12-xx F-Clsxx
xxxxx