NEC Aspila Topaz - 22-12: DID Intercept Ring Group

206
Programming Manual
Program 22: Incoming Call Setup
22-12: DID Intercept Ring Group
IN
SA
SB
Description
For each DID Translation Table, use Program 22-12 : DID Intercept Ring Group to define the first destination
group for DID calls.
Depending on the entry in Program 22-09 and 22-11, the incoming calls will route to the first destination group by
the following;
• Vacant number intercept (vacant number means that there is no phone connected, no station card installed, or the
extension number is not defined in Program 11-02)
• Busy intercept
• Ring-no-answer intercept
If the destination is '0', the calls will be forwarded to the trunk ring group defined in Program 22-11 based on the
table assigned to the DID trunk.
Note: If Program 22-09-05 and 22-09-06 are set, the priority of transferring will be in this order:
Program 22-09-05 Æ
Program 22-09-06 Æ Program 22-12
Input Data
Conversion Table Area Number
1-20
Day/Night
Mode
Incoming Group Number Default Related Program
1-8
0 : No setting
1-25 : Incoming Ring Group
101 : DSPDB-VM
0
Conditions
None
Feature Cross Reference
 Direct Inward Dialing (DID)