NEC Aspila Topaz - PRG 12: Night Mode Setup; 12-01: Night Mode Function Setup

65
Program 12: Night Mode Setup
12-01: Night Mode Function Setup
Programming Manual
IN
SA
SB
Description
Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the following chart
for a description of each option, its range and default setting.
Input Data
Prog. No. Item Input data Default Description
Related
Program
12-01-01
Manual Night
Service Enable
0 : Off
1 : On
1
Allows/prevents users from activating
Night Service by dialing a service code.
11-10-01
12-01-02
Automatic
Night Service
0 : Off
1 : On
0
According to a preset schedule, enable
or disable Automatic Night Service for
the system.
12-02
12-03
12-04
Note: Even if the operation mode is changed manually, the operation mode changes according to the schedule set
up.
Conditions
None
Feature Cross Reference
 Night Service
Telephone Programming Instructions
To enter data for Program 12-01 (Night Mode Function Setup):
1. Enter the programming mode.
2. Enter 12 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
12-01-01
Manual NT-Mode
12-01-xx
xxxxx