50
Program 11: System Numbering
11-07: Department Group Pilot Numbers
Programming Manual
IN
SA
SB
Description
Use Program 11-07 : Department Group Pilot Numbers to assign pilot numbers to each Department Group set up
in Program 16-02. The pilot number is the number users dial for Department Calling and Department Step Calling.
The pilot number can be up to four digits long. The first/second digit(s) of the number should be assigned in
Program 11-01 as type 2.
Department (Extension) Group Number
1-32
Extension Group
Pilot Number
Description Related Program
Dial (up to 4 digits)
z Use this program to assign department
group pilot numbers.
z The number set up by Program 11-02
(Extension Numbering) cannot be used.
z The extension number cannot be
duplicated in Programs 11-02, 11-04, 11-
06 and 11-08.
• 16-01 : Department (Extension)
Group Basic Data Setup
• 16-02 : Department Group
Assignment for Extensions
• 16-03 : Secondary Department
Group
Default
Extension Group Number 1-32: No setting (Extension Group Pilot Number)
Conditions
None
Feature Cross Reference
Department Calling
Department Step Calling
Telephone Programming Instructions
To enter data for Program 11-07 (Department Group Pilot Numbering):
1. Enter the programming mode.
2. Enter 11 07
3. Enter the number of the item you want to program.
4. Select the Telephone group number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
11-07-01TEL Gr1
Ext Grp No.
11-07-xxTEL
Grpxx
To Next Page
Loading...
