NEC Aspila Topaz - 31-02: Internal Paging Group Assignment

267
Programming Manual
Program 31: External Speaker and Internal Pagin
g
31-02 Internal Paging Group Assignmen
t
SA
SB
COP
Y
IN
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to Internal Paging Groups (i.e.,
Page Zones). The setting in this program also determines if the Internal Page Group can receive Internal All Call
Paging. The system can have up to 32 paging groups. An extension can be in only one Internal Paging Group.
Input Data
Prog. No.
Extension
Number
Item Input Data Default
31-02-01
Internal Paging Group Number
Assign extensions to Internal Paging
Groups (i.e., Page Zones). The system
allows up to 64 Internal Paging Groups.
An extension can be in only one Internal
Paging Group.
0-32(0 : no setting)
0
31-02-02
Max. 4 digits
Internal All Call Paging Receiving
Allow or prevent All Call Internal Paging
for each extension. If allowed, extension
can place and receive All Call Internal
Paging announcements. If prevented,
extension can only make (not receive) All
Call Internal Paging announcements.
0 : Off
1 : On
0
Conditions
None
Feature Cross Reference
 Paging, Internal
Telephone Programming Instructions
To enter data for Program 31-02(Internal Paging Group Assignment):
1. Enter the programming mode.
2. Enter 31 02
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Select the Extension number to be Programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
31-02-01 TEL200
INT PG GP No 0
31-02-xx
TELxxxx