NEC Aspila Topaz - 44-06: Additional Dial Table

311
Programming Manual
Program 44: ARS/F-Route Setup
44-06: Additional Dial Table
SA
SB
IN
Description
Use Program 44-06 : Additional Dial Table to set the additional dial table to add prior to the dialed ARS/F-Route
number.
Input Data
Additional Dial Table Number Additional Dial Default
Related
Program
1-1000
Up to 36 digits(0-9,*,#,Pause)
No setting
Conditions
None
Feature Cross Reference
 Automatic Route Selection(ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-06(Additional Dial Table):
1. Enter the programming mode.
2. Enter 44 06
3. Enter the number of the item you want to program.
4. Select the Additional Dial Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
44-06-01 Add1
Dial
44-06-xx
A
ddxxxx
xxxxx