NEC Aspila Topaz - 90-03: Save Data

354
Programming Manual
Program 90: Maintenance Program
90-03: Save Data
IN
SA
SB
Description
Use Program 90-03 : Save Data to save the programmed data on the SRAM and Flash ROM to the Removable
Compact Flash Memory. This program should be used after changing the programmed data.
Input Data
[Data Save] : Dial 1 and HOLD key (Press only HOLD key for cancel)
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-03 (Save Data):
1. Enter the programming mode.
2. Enter 90 03
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
90-03-01
Data Save
90-03-xx
xxxxx