NEC Aspila Topaz - 21-03: Trunk Group Routing for Trunks

168
Programming Manual
Program 21: Outgoing Call Setup
21-03: Trunk Group Routing for Trunks
IN
SA
SB
COP
Y
Description
Use Program 21-03 : Trunk Group Routing for Trunks to set the Trunk Route Table for Automatic External Call
Forward. The Route Table is set in Program 14-06.
Input Data
Trunk Port Number
1-51
Day/ Night Mode Route table number Default Related Program
1-8 0-25 ( 0 : No setting) 0
14-06
14-01-07
Conditions
None
Feature Cross Reference
 Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 21-03(Trunk Group Routing for Trunks):
1. Enter the programming mode.
2. Enter 21 03
3. Enter the number of the item you want to program.
4. Select the Trunk number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
21-03-01 Trunk1
Mode1=RouteTBL
21-03-xx Trunkxx
xxxxx