NEC Aspila Topaz - 21-15: Individual Trunk Group Routing for Extensions

184
Programming Manual
Program 21: Outgoing Call Setup
21-15: Individual Trunk Group Routing for Extensions
IN
SA
SB
Description
Use Program 21-15 : Individual Trunk Group Route for Extensions to designate the alternate trunk access route
accessed when a user dials the Alternate Trunk Route Access Code. Refer to Program 11-09-02 - Alternate Trunk
Access Code when setting up alternate trunk codes. Turn to Program 14-06 - Trunk Group Routing to set up the
trunk routes. When entering data for this option, enter the route number or 0 to prevent routing.
Input Data
Extension Number
Max. 4 digits
Day/Night Mode
Route Table Number Default Related Program
1-8
0-25 (0 : No setting) 0
11-09-02
14-01-07
14-06
Conditions
None
Feature Cross Reference
 Central Office Calls, Placing
Telephone Programming Instructions
To enter data for Program 21-15(Individual Trunk Group Routing for Extensions):
1. Enter the programming mode.
2. Enter 21 15
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
21-15-01 TEL200
Mode1=RouteTbl0
21-15-xx
TELxxxx