NEC Aspila Topaz - 11-16: One-Digit Service Code Setup

63
Programming Manual
Program 11: System Numberin
g
11-16: One-Digit Service Code Setup
SB
SA
IN
Description
Use Program 11-16 : One-Digit Service Code Setup to customize the one-digit Service Codes used when a busy
or ring back signal is heard. You can customize additional Service Codes in Programs 11-10 through 11-15.
The following chart shows:
• The number of each code (01-10)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code’s default entry. For example, dialing 1 (code 03) when calling an extension will switch the call from
either a voice or signal call (depending on how it’s currently defined).
• Programs that may be affected by changing these codes.
Input Data
Prog. No. Item Terminals Default
Related
Program
11-16-01 Step Call KTS,SLT No setting
11-16-02 Barge-In KTS,SLT No setting
11-16-03 Switching of Voice/ Signal Call KTS,SLT 1
11-16-04 Intercom Off Hook Signaling KTS,SLT No setting
11-16-05 Camp-On KTS,SLT No setting
11-16-06 DND/Call Forward Override KTS,SLT No setting
11-16-07 Message Waiting KTS,SLT No setting
11-16-08 -Not Used- - -
11-16-09 Access to Voice Mail KTS,SLT No setting
11-16-10 STG All Ring Mode KTS,SLT No setting 16-01-05
Conditions
None
Feature Cross Reference
• Refer to chart above.