97
Program 15: Extension Basic Setup
15-01: Basic Extension Data Setup
Programming Manual
IN
SA
SB
COP
Description
Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension.
Input Data
Extension Number Max 4 digits
Prog. No. Item Input data Default
Related
Program
15-01-01
Extension Name
Set the extension/virtual extension
name
Up to 12 Characters 200: EXT200
:
295: EXT295
15-01-02
Outgoing Trunk Line Preference
Use this option to set the
extension’s outgoing Trunk Line
Preference. If enabled, the
extension user get trunk dial tone
when they lift the handset.
The user hears trunk dial tone only
if allowed by Trunk Access Map
programming (Programs 14-07 and
15-06). Refer to the Line
Preference feature for more details.
0 : Off
1 : On
0
14-06
21-02
15-01-03
SMDR Printout
Use this option to include or
exclude the extension you are
programming in the SMDR report.
0: Do not print on SMDR
report
1: Include on SMDR report
1
15-01-04
Calling Party Number notification
(ISDN Trunk)
0 : Disable
1 : Enable
1
15-01-05
The terminal for restriction in
Outgoing Disable - On Incoming
Line
0 : Supervise dial detection
1 : Not Supervise dial
detection
０
21-01-15
21-01-16
21-01-17
Conditions
None
Feature Cross Reference
Refer to feature in above chart.
To Next Page
Loading...
