NEC Aspila Topaz - 40-08: Voice Prompt Language Assignment for each Mailbox

298
Programming Manual
Program 40: Voice Mail Setup
40-08: Voice Prompt Language Assignment for each Mail Box
IN
SA
SB
Description
Use Program 40-08 : Voice Prompt Language Assignment for each Mail Box to specify the language to be used
for the voice mail.
Input Data
Mail Box Number
1-300
Prog. No. Item Input Data Default
Related
Program
40-08-01
Voice Prompt Language Assignment
for Mailboxes
Although the system allows this option to
be changed in programming, the language
will only change if the DSPDB has
the firmware which provides the newly
selected language.
1 : English
1
Conditions
None
Feature Cross Reference
 Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-08 (Voice Prompt Language Assignment for each Mail Box):
1. Enter the programming mode.
2. Enter 40 08
3. Enter the number of the item you want to program.
4. Select the Mail Box number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
32
40-08-01MgBox1
Mail Lang 1
40-08-xx MgBoxxx
xxxxx