NEC Aspila Topaz - 24-07: Fixed Call Forwarding Off-Premise

226
Programming Manual
Program 24: Hold/Transfer Setup
24-07: Fixed Call Forwarding Off-Premise
IN
SA
SB
Description
Use Program 24-07 : Fixed Call Forwarding Off-Premise to assign the Fixed Call Forwarding Off-Premise
telephone number for each extension/virtual extension. The off-premise destination can be up to 36 digits long,
using 0-9, *, # and P (pause). Be sure to include the trunk access code (e.g., 9) in the number.
Input Data
Extension Number
Max. 4 digits
Off-Premise Destination Number Default
0-9, * #,P,R,@ (Max. 36 digits) No setting
Conditions
None.
Feature Cross Reference
 Call Forwarding, Off-Premise
Telephone Programming Instructions
To enter data for Program 24-07(Fixed Call Forwarding Off-Premise):
1. Enter the programming mode.
2. Enter 24 07
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
24-07-01 TEL200
Dial=
24-07-xx
TELxxxx