NEC Aspila Topaz - Page 233

225
Programming Manual
Program 24: Hold/Transfer Setup
24-06: Fixed Call Forwardin
g
SA
SB
IN
Telephone Programming Instructions
To enter data for Program 24-06(Fixed Call Forwarding):
1. Enter the programming mode.
2. Enter 24 06
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
24-06-01 TEL200
Fix Cfwd Type 0
24-06-xx
TELxxxx