NEC Aspila Topaz - 22-13: DID Trunk Group to Translation Table Assignment

208
Programming Manual
Program 22: Incoming Call Setup
22-13: DID Trunk Group to Translation Table Assignment
IN
SA
SB
Description
Use Program 22-13 : DID Trunk Group to Translation Table Assignment to assign the DID Trunk Groups to
DID Translation Tables. DID trunks should be in their own group. If you have more than one type of DID trunk, put
each type in a separate Trunk Group. For each Trunk Group, you make a Translation Table entry for each Night
Service mode.
Input Data
Trunk Group Number
1-25
Day/Night
Mode
Conversion Table Area Number Default Related Program
1-8
0-20 (0 : No setting) 1
Conditions
None
Feature Cross Reference
 Direct Inward Dialing (DID)
Telephone Programming Instructions
To enter data for Program 22-13(DID Trunk Group to Translation Table Assignment):
1. Enter the programming mode.
2. Enter 22 13
3. Enter the number of the item you want to program.
4. Select the Trunk Group number to be programmed by pressing the FLASH or the VOLUME or
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
22-13-01TrkGrp1
Mode1 = 1
22-13-
xxTrkGrpxx